未注冊
| 型號 Model | Unit | KS-15T | ||
|
射出 系統 injection system |
螺桿直徑 Screw Diameter |
mm | 22 | 25 |
|
射出壓力Injection Pressure |
Kg/cm² | 1851 | 1433 | |
|
理論射出容量Theoretical Shot Volume |
cm³ | 40 | 52 | |
|
射出量 Max.shot Weight(ps) |
g | 37 | 48 | |
| oz | 1.3 | 1.7 | ||
|
射出速度 Injection speed |
mm/s | 91 | ||
|
射出速率 Injection Rate |
cm³/s | 35 | 45 | |
|
螺桿轉速 Screw Speed Rotation |
r.p.m | 171 | ||
|
溫度控制段數 Number of Temperature Control |
Zone | 3 | ||
|
鎖模 系統 Clamping system |
鎖模力 Clamping Force |
Tons | 15 | |
|
開模力 Opening Force |
Tons | 5 | ||
|
模板尺寸 Slide Size |
mm | 450*280 | ||
|
模柱間距（L×W）Distance Between Tie Bars |
mm | 270 | ||
|
最小模厚 Min.Mold Thickness |
mm | 30/100 | ||
|
最大容模尺寸（L×W）Max.Mold Size |
mm | 200*180 | ||
|
開模行程 Oprening Stroke |
mm | 180 | ||
|
頂出力量 Ejector Force |
Tons | 1.5 | ||
|
頂出行程 Ejector Stroke |
mm | 30 | ||
|
電力及 其它 Electric system and otherw |
最大液壓壓力 Max.Hydaulic Pressure |
Kg/cm² | 140 | |
|
電機電力 Pump Motor Power |
kw/HP | 4/5.5 | ||
|
電熱容量 Barrel Heating Power |
kw | 2.2 | ||
|
機器重量 Machine Weight |
Tons | 0.55 | ||
|
機器外型尺寸Machine Dimensions(L×W×H) |
m | 1.25*0.93*2.16 | ||
|
注:本參數按聚苯乙烯比重1.05,注射系數取0.88計算。如有設計更改，恕不另行通知。 |
||||
